Torque Limit - Single Load

1. Palm Style Ortho-Grip® Torque Limiting Driver
   Palm Style driver can be used in various configurations with your specific shaft requirements. The driver shown has a QuickLock® adapter for modular use with replaceable shafts.
   item #PT101xxx
   
   Other Adapters are available on request.
2. Large In-Line Torque Limiting Ortho-Grip® Handle
   For your higher torque limiting needs the in-line Ortho-Grip® handle is perfect for your specific needs. Custom interconnections are available.
   item #SC201000 (shown) with 1/4" male square drive
   item #SC211000 (not shown) with 1/4" female square drive
   Other Adapters are available on request.
3. Mini In-Line Torque Limiting Ortho-Grip® Handle
   For your higher torque limiting needs the in-line Ortho-Grip® handle is perfect for your specific needs. Custom interconnections are available.
   item #SC311000 (shown) with 3/16" female square drive
   Other Adapters are available on request.
4. Ortho-Grip® Torque Limiting T-Handle
   A compact T-handle torque limiting wrench that is capable of preset loads up to 110 lb-in Custom interconnections are available.
   item #TM101xxx (shown) with 1/4" female square drive
5. Torque Limiting Adapter
   Converts your 1/4" square drive handles into torque limiting devices. These can be set from 10 lb-in to 120 lb-in of torque. Only 1" in diameter and can be permanently attached to any of our Ortho-Grip® silicone handles.
   item #TM201xxx
   
   
6. Standard Torque Limiting
   T-Handle
   Our standard T-handle torque wrench is capable of pre-set torque limiting up to 120 lb-in. Handles can be anodized to your specific color requirements. Now available with Ortho-Grip® silicone rubber handles.
   item #TL101000 (shown) with optional square drive locking button
   Other Adapters are available on request.
7. Small Torque Limiting T-Handle
   Similar to our large version but limited to 85 lb.-in. Handles can be anodized to your specific color requirements. Now available with Ortho-Grip® silicone rubber handles.
   item #TS101000 (shown) with standard square drive ball detent
   Other Adapters are available on request.
8. Adjustable Torque Limiting T-Handle
   Adjustable torque wrenches can be pre-set to two different torque settings which are available with the twist of the handle. Handles can be anodized to your specific color requirements.
   Other Adapters are available on request.
9. Ratchet Shaped Torque Limiting Handle
   Ratchet shaped wrench can be used with most interconnection methods. Doubled ended models with dual preset torque limits are available.
   Double Ended Torque Limiting Wrench, item #V0200500 (shown), can be set to a different torque at each end.
   One Way Torque Wrench, item #V0200800 (shown).
10. Ortho-Grip® Torque Limiting T-Handle
    Comfort "T" Ortho-Grip® Torque Limiting Driver (shown) with 1/4" Square QuickLock®
    item# TM112xxx
    Other Adapters are available on request.
11. Extended "T" Torque Limiting Driver with large female Hudson Adapter,
    item# TX108xxx
    Other Adapters are available on request.